Chargers
      Back to home
      1. Clenergy EV Knowledge Base
      2. Hardware
      3. Chargers

      How to Onboard: Garo GLB+

      This article will talk you through how to connect a Garo GLB+ to the Clenergy EV back office.

      1. Plug your laptop into the configuration port via a USB to micro-USB cable
      2. Open a web browser such as Mozilla Firefox or Google Chrome and type in the following IP address: 192.168.123.123/operator
      3. Username: operator Password: cherry_zone
        Please note: When configuring the charger it is recommended to save and reboot frequently
        1. Enter the Settings menu on the left hand side of the screen.
        2. Leave the OCPP ChargeBoxIdentity (ChargepointID) field blank to allow the charger to connect via its serial number.
        3. Select your network connection type from the drop-down menu in the Connection Type field.
        4. Select OCPP-J 1.6 from the drop-down menu in the OCPP Mode field.
        5. Enter wss://clenergy.online:8081 in the WebSockets JSON OCPP URL of the Backend field.