This article will talk you through how to connect a CITA Smart 7 charger to the Clenergy EV back office.
đŸ“± To download a mobile friendly version of this charger's onboarding guide in a PDF format, please click here.
- Before powering up the charger, photograph or take note of the 4 digit admin password located on the back of the charge point’s cover.
- Power up the charger and wait for the LED flash green intermittently. At this point the charger's WIFI hotspot should become available.
- Select the WIFI hotspot on your device (identified as matching the charge point serial number); using the password admin123 to join.
- Navigate to the CITA charger portal by entering 192.168.4.1 into the navigation bar of the web browser on your device.
- Enter the password as displayed on the rear of the charge point’s front cover.
- On the main menu, select Charge Point Setup.
- Select the correct network using the relevant menus and join using the appropriate credentials.
Please note: If using a Clenergy EV-supplied SIM card for the network connection please refer to the details below and enter the relevant credentials into the appropriate field:
Conexa SIM APN: eapn1.net
KPN SIM APN: wlapn.com
Password/Username (for both suppliers): clenergy
In the event a 3rd party SIM card is being used, please refer to the supplier or manufacturer for the correct details.
4G/SIM and Ethernet network capabilities are additional features and may not be available unless specified.
Please note: the charge point’s serial number will automatically be added to the OCPP URL.