This article will talk you through how to connect a Starcharge Aurora charger to the Clenergy EV back office.
- Plug your laptop into the ethernet port. This can be located at the rear of the charger.
- Ensure the ethernet network on your laptop is configured correctly and the Wi-Fi is switched off. (If you need further help with configuring IP addresses, please see our article here)
- Open a web browser such as Mozilla Firefox or Google Chrome and type in the following IP address: 192.168.88.206.
- Enter "xxcd" into the Username field and "28912891" into the Password field.
- Select the required network connection method from the Quick Setup menu by selecting Enable Modification next to the relevant connection type.
If using the 4G/SIM method enter the relevant details into the APN, User Name and Password fields.
Please note: If using a Clenergy EV-supplied SIM card for the network connection please refer to the details below.
Conexa SIM APN: eapn1.net
KPN SIM APN: wlapn.com
Password/Username (for both suppliers): clenergy
In the event a 3rd party SIM card is being used, please refer to the supplier or manufacturer for the correct details.
Enter the PIN number provided on the SIM Card into the PIN field. - If unsuccessful, clear the cache memory of your laptop, shut down your web browser and try again.
- In the OCPP Part enter clenergy.online into the URL field.
- Enter 8081 into the Port field
- Enter 1 into the SSL_ON field (this enables SSL) and click Submit and complete a power cycle. Select Software Setting from the menu on the left hand side.
